Heater Equipment

Product Details:

We offer best quality Heater Clamp which are used at the connection of band heater. Standard size makes easy to fit well in all types and size of band heaters, gives good and strong fit to the heater connection.

Product Details:

Heater connection stud is mainly used for mica and ceramic band heater. These stud is inserted into clamp and then secured it with an bolt. M6 & 1/4' thread types are avaliable. Easy to use and easy to fit.

Product Details:

Ceramic Insulated Finned Channel Strip Heaters are ideal for both forced air in a duct and natural convection air heating in a cabinet type oven. Fins increase the heat transfer surface area to allow higher wattages than standard Strip Heaters. These are intended to be operated with a substantial airflow and are typically used in heating tunnels, dryers or any application that requires a hot air source.

Steel fin strip heaters are an excellent industrial heating product that can be easily controlled by using a heating control panel, mechanical thermostat or cost effective bi-metal thermostats that can be installed on the surface of the heater. Mounting holes are useful to mount the heaters securely on the wall housing with terminal extending from the sheath for easy electrical connections. Many users also request lead wires that extend from one end that make the installation more flexible as the temperature controller is easily adaptable to this configuration.

A finned strip heater is filled with ceramic strips insulation which conducts heat from the nickel-chrome element wire to the outer sheath. The fins are spaced in a way that maximizes surface contact so that heat is displaced, and then transferred into the air faster.

 

Finned strip heaters are a fairly inexpensive way of heating small areas and are an excellent solution to meet any budget.Finned strip heaters are composed of a heating element, a protective sleeve or sheath, and mounting hardware along with steel finned that are used to extend surface area. If strip heaters are used as a radiant heater, or a duct heater, they have can have fins to maximize surface area and heat transfer to the air. Strip heaters can be clamped or bolted onto objects or solid surface contact heating over large areas and are primarily used in indoor applications.

Features:

• High heat transfer rates and fast heat up
• Long life
• Large selection of lengths, sizes and terminations
• Low expansion characteristics
• Distributed wattage available

Application:

• Process air heating

• Dehumidifiers 

• Drying equipment

 

 

• Duct Heaters Winterizing 

• Laboratory equipment 

• Space heating

• Packaging and sealing equipment

• Food warming equipment

• Air conditioning

 

Product Details:

Micro Tubular Coil Heater is a small, linear heating element that can be formed into different shapes and configurations. Also known as a Hot Runner Heater for its extensive use in Hot Runner Systems, the Micro Tubular Coil Heater is a high-performance heater which allows high wattage in a limited space.

Micro Tubular Coil Heater has a larger cross-sectional area and is thus capable of greater power. For this reason, the Hot Runner Heater is used in hot runners with adequate space and where high heat densities are required. Micro Tubular Coil Heater can accommodate type “J” or “K” thermocouple sensors. These heaters can be constructed with or without built in thermocouples.

They are usually installed where space available for heating is limited and are widely used on hot runner nozzles, and manifolds, die cast nozzles, packaging machines etc.

Application:

• Injection Molding Machine
• Hot Runner Systems
• Rod,Pipe & Tube Heating
• Thermoforming Machine
• Medical Equipment
• Heat Tracing
• Cutting & Sealing

 

 

Product Details:

Finned tubular heater are the most common type of heating elements used for heating air and other gases. The fins along the tubular length assist in even heat dissipation. All elements have mild steel fins brazed to the tubular heating element sheath. In applications where tubular heaters are exposed to forced convection, placing fins around tubular heaters increases their surface area and thus improves their heat transferring capacity. Finned tubular heaters, compared to regular tubular heaters, run at lower surface temperatures for the same watt densities when placed in identical air streams

The physical characteristics of a finned tubular heater play a major role in the effectiveness of its heat transfer. Fins are continuously spiral wound tightly onto the element surface to increase the convective surface area for air and non-corrosive gas heating. Fin spacing and size have been tested and selected to optimize performance. The sheath material of a finned tubular heater and its watt density are two critical factors that affect its durability. Variety of Lengths and Bend formations available in finned tubular heaters.

Features:

• Custom-formed to meet specific requirements
• Precision wound resistance wire for long heater life
• Superior heat transfer
• Variety of lengths available
• Easy to install
• Even Heat Distribution

Applications:

•  Air heating
• Liquid heating (oil , grease , water , corrosive liquids )
• Radiant Heating
• Dehydration Machines

Product Details:

We have earned a sterling reputation in the industry for supplying and trading Energy Regulator. The offered energy regulator is impeccable in performance and is used in appliances for trapping heat. These are used in OTG., drying cabinets, wash boilers, boiling rings hot plates, grills, boilers. Thermoplastic & Thermosetting moulding machines, oil baths, switchgear & panel board and other domestic, commercial & industrial heating equipment.

Features:

Optimum performance

Dimensionally accurate

Impeccable design

Operation:

Our range has a snap action switch opens and closes the load circuit at exact time intervals. The 'ON' to 'OFF' system can be changed and regulated as per the requirement and thereby, ensuring smooth output of heat.

Physical Characteristics:

Easily rotatable both way

Steady holds on off and full position

Bakelite Heat Resistance Base

Adequately covered to withstand temperature condition

Product Details:

Available with us is a wide range of Heating Mantles, which are fabricated using premium quality raw material. Our mantles are available at the most affordable prices and can be customized in terms of sizes & designs as per the specific demands of the valuable patrons. These mantles are highly acknowledged by the patrons due to their premium quality and use of the latest techniques & equipment. Some of their attributes are given below:
Maximum accuracy
High strength
Superior quality

Product Details:

Available with us is a wide range of best quality special Industrial Heating Coil, that are known amongst clients for efficient properties, long functional life and low operational cost. We manufacture these industrial heating coils keeping into consideration the set industrial parameters.

Product Details:

With rich industry experience and knowledge, we are providing Immersion Heater Rubber Caps. This are fixed at the connection end of SS, glass, titanium & Silica tubes to cover heater terminals. These heater caps are developed with precision from the top-notch material & latest techniques in conformity with the industry standards. Our offered heater caps are high on demand among our valuable customers owing to its optimum quality.

Features:

• Application specific design
• Easy to install remove and maintenance
• Low maintenance cost

 

Product Details:

The high-temperature plug is made of brass core and ceramic, outside is made of metal aluminium protection shell or silicone rubber protective shell.
Application:
Widely used in Rubber Machine, Food Machine, Chemical, Electric wire etc, and kinds of industry, high-temperature power connection wire of kinds of plug style electric heating element.

Product Details:

We offer Iron Pin connector & Iron Plug which is widely used for Industrial & domestic purpose.Mainly Iron pin is used for band heater & strip heater connection & also for industrial iron press, & Iron Plug is used for there electrical connection where direct heating is not there.

Product Details:

Flange is used for Heaters, Tubular Heaters or Tubular Heating Elements Junction, where tubular heater elements are connected together. Nipple are used on single tubular element connection, where heater can be fixed on metal plate to have firm connection. 

Product Details:

Brass nipple are fixed at the connection stud of industrial tubular heater, to have extra strong connection. Inner threadings is fixed on tubular heater stud and outer threading is used for heater connection.At times in higher temperature connection stud tends to melt, thus these brass nipple are fixed over it to resist in higher temperature.

Features:

• Heat Resistance
• Strong Hold
• Long Life
• Heavy Duty